12W 1200lm all-in-one solar LED light with PIR motion sensor, small order accepted

Model Number: DJ604-12WPV-12WLED-012 Brand Name: WANYELONG SOLAR Key Specifications/Special Features: Key specification:Solar panel:12W 15V Poly crystalline solar panelBattery: 9.6V 6Ah LiFePO4 batteryLED lamp: 12W/1200Lumens LED LampWorking temperature: 0-+60℃. )

Charge time: 6h under full sunshine

Remark: NEO solar cell, top battery, Epistar LED chip

Installation on wall or post.

Installationheight: 4-4.5m

Features--Three working modes:
--Mode 1: Adjust the power intelligent. saving mode 3W(300LM), motion sensed with bright mode 12watt(1200LM)-12hours.The LED power will be changed according to the consumption of battery capacity to save energy.
--Mode 2: Step-shaped working. In the First 6 hours, saving mode 3W(300LM), motion sensed with bright mode 12watt(1200LM) .After Midnight 6 hours, saving mode 1.5W(150LM), motion sensed with bright mode 6watt(600LM)
--Mode 3: No people no lighting, when PIR sensor detect people’s movement, it will turn to bright mode, 12W (1200LM) LED. When people left, it will turn off.

Install instructions:
The light can be mounted on pole or wall. Prevent the solar panel from being covered by buildings and shadows when installation. Make the solar panel face south in the Northern Hemisphere and face north in the Southern Hemisphere.

Tips:

• The longest time of storage is 6 months when the battery is full. The battery may be empty and lamp can’t work when you get the products because there is battery self-discharge. Turn off the switch and put the lamp under sun for 1-2 days charging, then turn it on, it will work normally. If you didn’t use it for a long time, we suggest charge it every 3 months to protect the battery.
• When the ambient temperature rises close to the human body temperature. The detection distance will be shortened.
• The total reference lighting time is based on full sun and ideal installation condition.

1. Please understand that in cloudy days or in winter, the sun is not strong as full sun in summer, you are not able get the ideal lighting time.
2. The ideal installation is to install the solar panel facing vertical with sunlight, and tilt solar panel close to your latitude, but considering that installation sites and lighting area are different, install the solar on east or west direction, time of exposure to sun is halved, so lighting time is shortened.

• Please do not open or repair product by yourself without support of professional engineer.
• Please make sure the solar panel is clean, for example such as dirt in the surface, leaves, and oil, should be removed in time, or it will affect the charging effect.
• Please choose the working mode before you install the light, and don’t switch off. Then install it directly. Because if you switch on again, maybe the working mode will be changed, 5 seconds is not easy to control.